Conrad C-Control Pro Mega Series Manual Download Page 89

Page: 89 / 240

IDE

For each program that is inserted, the user can choose the name, the execution path and the
parameters that are submitted.

4.7

Windows

When there are several windows opened within the editor area they can automatically be arranged
by use of commands in the

Window

Menu.

Overlap

– The windows will be arranged on top of each other with each successive window placed

fractionally lower and more to the right than the preceeding one.

Beneath

– The windows are placed vertically beneath each other.

Side By Side

– Will arrange the windows next to each other from left to right.

Minimize All

– Will minimize all windows to symbol size.

– Will close all active windows.

Summary of Contents for C-Control Pro Mega Series

















































































































































































































































Search results

Summary of Contents for C-Control Pro Mega Series

Reviews:

Conrad C-Control Pro Mega Series, Manual, Page: 89 / 240

Search results

Summary of Contents for C-Control Pro Mega Series

Reviews: