![background image](http://html.mh-extra.com/html/conrad/c-control-pro-mega-series/c-control-pro-mega-series_manual_2654183022.webp)
13
C-Control Pro Mega Series
© 2008 Conrad Electronic
The message "C-Control Pro USB Device has not passed the Windows Logo Test ...." will normally
appear. This does not mean that the driver has failed during the Windows Logo Test. It merely
means that the driver has not taken part in the (quite costly) Redmond Test.
Here click "Continue Installation". The USB driver should then be installed after a few seconds.
In the PC software click on
IDE
in menu
Options
and select the area
Interfaces
. Here select the
communication port "USB0".
The FTDI driver supports 32 bit and 64 bit operating systems. The specific drivers are located in
the "FTDI USB Driver\i386" and "FTDI USB Driver\amd64".
Serial Connection
Due to the slow transmitting speed of the serial interface the USB connection should preferably be
used. If however due to hardware grounds the USB interface is not available then the Bootloader can
be switched into the Serial Mode.
To do this the key SW1 has to be kept pressed during power-up of the Application Board. After this
the Serial Bootloader Mode will be activated.
In the PC software click on
IDE
in menu
Options
and select the area
Interfaces
. Here select the
communication port "COMx", which fits to the PC interface connected to the Application Board.
2.2
Software
When the attached CD-ROM is inserted into the computer the Installer should be automatically
started in order to install the C-Control Pro software. If this is not the case because e. g. the
Autostart Function in Windows is not activated then please manually start the Installer 'C-
ControlSetup.exe' in the main directory of your CD-ROM.
For the time of software and USB driver installations the user must be registered as
administrator. During normal operation of C-Control Pro this is not necessary.
In order to maintain consistency of the demo program during installation on top of an existing
installation the old directory Demo Programs will be deleted and replaced by a new one. It is thus
recommended to install other programs outside the C-Control Pro directory.
At the beginning of the installation first select the language in which the installation should take
place. After that you can choose whether you want to install C-Control Pro into the standard path or
whether you want to specify your own target directory. At the end of the installation process you will
be asked if an icon should be created on your desktop.
When the installation process is completed you can choose whether you want to see the "ReadMe"
file, have the shortform introduction displayed or directly start the C-Control Pro design platform.
Summary of Contents for C-Control Pro Mega Series
