Technische Daten
Spannungsversorgung ........: 230 Volt 50 Hz 10% (10/16 A)
Lampenleistung...................: max. 1000 Watt mit Glühlampen
max. 200 Watt mit Leuchtstofflampen
Arbeitstemperaturbereich....: -20° C bis + 50° C
Erfassungsbereich...............: ca. 12 Meter bei +20° C
Erfassungswinkel ................: 180°
Lichtintensität ......................: 30 Lux (einstellbar)
Schutzart .............................: IP 44
Schutzklasse .......................: II
16
Introduction
Dear Customer,
Thank you for purchasing this PIR-motion-detector!
You have acquired a product which has been designed to the latest
technological standards.
This product meets national and European requirements for elec-
tromagnetic compatibility (electromagnetic compatibility 89/336/
EWG, low voltage guideline 73/23/EWG). Conformance to these
has been proven; the relevant statements and documents are lod-
ged with the manufacturer.
To maintain this condition and to guarantee safe operation, the
user must observe this operating instruction without fail!
Intended use
This PIR-motion-detector is made for taking the motions inside IR-
sensors areas. It is also made for switching on and off electric con-
sumer, e. g. throwing lights on in a room, in a garage, on the door,
in the entrance etc. The power of a bulb can be max. 1000 W and
max. 200 for a fluorescent lamp!
It is only allowed to connect this product to 230Volt / 50Hz (10/16A)
alternating voltage. It is allowed to install this product indoors and
also outside. If you want to use this product outside you have to
pay attention that there is no direct contact to water (rain/fog)!
Any other use as described can lead to damage to this product; in
addition, this is accompanied by dangers, for example short circuit,
fire, electric shock etc. The product as a whole should not be mo-
dified or converted.
The safety instructions must be followed without fail!!
GB
17
