![background image](http://html.mh-extra.com/html/conrad/1484607/1484607_operating-instructions-manual_2654583013.webp)
13
The operating display consists of the following elements:
1 Battery symbol
2 Model type symbol
3 "Dual Rate" display
4 Signal encoder display
5 Transmitter voltage display
6 Nod-trim display (mode 2)
7 Roll trim display
8 Timer display
9 Transmitter type display
10 Flight condition display *
11 Trail trimming display
12 Display of the last control channel
operated **
13 Pitch-trim display (mode 2)
14 Display of the set control stick mode
* The flight condition display of the transmitter is coupled with the "Dual Rate" switch. When the maximum control
paths are activated and the upper right of the display shows "D/R 0", the display will show a helicopter in inverted
flight position. This display is not relevant in connection with the electrical helicopter "HFP80", since this model
helicopter is not designed for inverted flight.
** When actuating a control stick, the respective control channel (CH1 - CH4) and the respective percentage of the
stick path are displayed at all times. If no control stick is moved for approx. 5 seconds, the transmitter voltage
display appears again.
Figure 5