EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
37
Disable
.)
Configure Ultrasound System for a Network Connection
To change the dynamic (DHCP) or static IP connection status:
Press
Support
and click the
Network/DICOM
tab.
Click
Network Settings
TCP/IP Properties
.
Do one of the following:
To use a dynamic IP address, click
Obtain an IP Address
Automatically.
To use a static IP address, click
Use the Following IPv4
Address
and type the IP address.
Click
OK
and then click
Navigator
DICOM Settings
.
Under
Ultrasound DICOM
Settings, enter the following
information:
AE Title
Port Number (a change in this field will cause the system
to restart)
Station Name
Station Location
Configure DNS Settings
To configure the DNS settings for your system:
Press
Support
.
Click the
Network/DICOM
tab.
Click
DNS Settings
.
If the network administrator specifies domain name server
(DNS) IP addresses, click
Use the Following DNS Server IP
Addresses
(in order) and add one or more DNS addresses.
If the network administrator specifies DNS suffixes, click
The values entered for
Station Name
and
Station
Location
must match the
corresponding
Modality
Worklist
field values.
Those fields can be left
blank, if the station name
or system location are not
being used in the worklist,
or if a worklist server is
not configured. The
network administrator
should be able to provide
this information.
Note:
If the system does not use
DHCP to specify the
addresses of domain
name servers, you must
enter the DNS settings for
the system before you
connect the system to
either a wired or a
wireless network.
All manuals and user guides at all-guides.com
