DX-1S Digital PABX - Programming Manual
5-6
5.1.25 PROGRAMMING ITEM 24 : TRUNK MAKE/BREAK RATIO
Trunk Make/Break Ratio is set to meet the PTT Pulse Dialing Specification of different countries.
Command
3 * 24 * Value <Enter>
where Value = 0 : 40/60 make/break ratio
Value = 1 : 33/67 make/break ratio
Default Value
Default = 0 : 40/60 make/break ratio
5.1.26 PROGRAMMING ITEM 25 : TRUNK FLASH TIME
This item is to set the flash time which is sent from the system trunk interface to public exchange.
Command
3 * 25 * Value <Enter>
where Value = 1 ~ 9 ( 0.1 to 0.9 seconds)
Default Value
Default = 5 (0.5 seconds)
5.1.27 PROGRAMMING ITEM 26 : DTMF DIALING TONE TIME
This item is to set the duration of each DTMF signal sending to public exchange from the system trunk
interface according to the PTT DTMF Dialing Specification of different countries.
Command
3 * 26 * Value <Enter>
where Value = 1 ~ 5 (0.1 to 0.5 seconds)
Default Value
Default = 2 (0.2 seconds)
Related Topic
1.
Programming Item 27 - DTMF Dialing Interdigit Time.
5.1.28 PROGRAMMING ITEM 27 : DTMF DIALING INTERDIGIT TIME
This item is to set the pause time between DTMF digits sending to public exchange from the system trunk
interface according to the PTT DTMF Dialing Specification of different countries.
Command
3 * 27 * Value <Enter>
where Value = 1 ~ 5 (0.1 to 0.5 seconds)
Default Value
Default = 2 (0.2 seconds)
Related Topic
1.
Programming Item 26 - DTMF Dialing Tone Time.
