Connection Electronics DX-1S, Programming Manual

Page: 68 / 157

DX-1S Digital PABX - Programming Manual
5-45
Tone
Number
Description Default
Value
Tone
Number
Description Default
Value
0 DTMF of digit ‘0’ 228 15 Internal Music 208
1 DTMF of digit ‘1’ 228 16 External Music 208
2 DTMF of digit ‘2’ 228 17 Fixed / Variable DISA
parameters 0
3 DTMF of digit ‘3’ 228 18 DISA voice playback
gain 208
4 DTMF of digit ‘4’ 228 19 DISA voice record /
DTMF receiver loss 170
5 DTMF of digit ‘5’ 228 20 Echo loss parameter 1 241
6 DTMF of digit ‘6’ 228 21 Echo loss parameter 2 32
7 DTMF of digit ‘7’ 228 22 Echo loss parameter 3 9
8 DTMF of digit ‘8’ 228 23 Dial Tone 208 = -10dBm
9 DTMF of digit ‘9’ 228 24 Feature Activation
Dial Tone 208 = -10dBm
10 DTMF of digit ‘*’ 228 25 Busy Tone 208 = -10dBm
11 DTMF of digit ‘#’ 228 26 Ringing Tone 208 = -10dBm
12 DDI Ringing Tone 208 = -10dBm 27 Confirmation Tone 208 = -10dBm
13 DDI Busy Tone 208 = -10dBm 28 Call Waiting Tone 108 = -20dBm
14 DDI Number
Unobtainable Tone 208 = -10dBm 29 Fax Test Tone 208 = -35dBm
For DTMF digits ‘0’ ~ ‘9’, ‘*’, ‘#’:
228 = -9dBm (low group),
-7dBm (high group) 30 ~ 31 Reserved 208
5.7.22 PROGRAMMING ITEM 121 : EXTENSION TO EXTENSION GAIN
This is to program the transmission gain for Extension to Extension connection. If the value is larger,
the signal gain will be higher.
Command
3 * 121 * Value <Enter>
where Value = 1 ~ 255 : Gain (relative)
Note : For every unit offset from the default value, 0.1 dB is changed.
Default Value
Value = 208 (-3.5dB)
5.7.23 PROGRAMMING ITEM 122 : TRUNK TO EXTENSION GAIN
This is to program the transmission gain for Trunk to Extension connection. If the value is larger, the
signal gain will be higher.
Command
3 * 122 * Value <Enter>
where Value = 1 ~ 255 : Gain (relative)
Note : For every unit offset from the default value, 0.1 dB is changed.
Default Value
Value = 208 (-3.5dB)