DX-1S Digital PABX - Programming Manual
3-2
──────────────────────────────
MANAGEMENT MODE
────────────
Printer 1, Paused
──
M0>
────────────────────────────────────────────────────────────────────────────────
'/' = Change Printer Status
Figure 3-2 MANAGEMENT MODE SCREEN
Remark
The default Management Mode Password is “7854”.
3.4
ENTER PROGRAMMING MODE
When entering the Programming Mode Screen from Management Mode Screen, the display had changed
as follow.
──────────────────────────────
MANAGEMENT MODE
────────────
Printer 1, Paused
──
M0>90*2168
<<Programming Mode>>
P0>
'/' = Change Printer Status
Figure 3-3 PROGRAMMING MODE SCREEN
Remark
1.
The default System Programming Mode Password is “2168”.
3.5
PRINT THE MESSAGES ON SCREEN TO PRINTER THROUGH PRINTER 1 PORT
When the system display some messages or information on the screen which may need to print out as
records for future reference, such as feature setting for extension data, programming data, system
configuration and diagnostic result etc. You can enable the printing function before the message
displayed. The console will start to output the messages on the screen to Printer 1 Port. If a printer has
connected in the Printer 1 Port, the message will print out as hard copy.
Operation
1.
When you want to print the message, press “/” to enable the print out function and there will have a
message in the top right corner of the screen as “Printer 1, Paused”.
