DX-1S Digital PABX - Programming Manual
5-3
5.1.11 PROGRAMMING ITEM 10 : CALL HOLD MUSIC TYPE
This item is to choice the internal music source or external music source from Music Port to be Call Hold
Music.
Command
3 * 10 * Value <Enter>
where Value = 0 : Internal Music
Value = 1 : External Music
Default Value
Default = 0
5.1.12 PROGRAMMING ITEM 11 : WAKE UP SERVICE MESSAGE TYPE
This item is used to select the message source for Wake Up Service Message.
Command
3 * 11 * Value <Enter>
where Value = 0 : Internal Music
Value = 1 : External Music
Default Value
Default = 0
5.1.13 PROGRAMMING ITEM 12 : DIALING TONE TIMEOUT
The Dialing Tone Timeout is the time that the system will wait for pulse or DTMF dialing digit as the
extension lift up the handset. The system will cut the dialing tone and return a busy tone if the extension
do not key in any number before timeout.
Command
3 * 12 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Default Value
Default = 10 (seconds)
5.1.14 PROGRAMMING ITEM 13 : BUSY TONE TIMEOUT
The Busy Tone Timeout is the duration the system will send busy tone to extension to indicate a busy
condition or the task do not succeed.
Command
3 * 13 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Default Value
Default = 10 (seconds)
5.1.15 PROGRAMMING ITEM 14 : INTERDIGIT TIMEOUT
The Interdigit Timeout is the duration from last digit that the system will wait to receive the next digit
from the extension. If the system do not receive any digit before Interdigit Timeout is reached, the system
will assume the extension has finished dialing process.
Command
3 * 14 * Value <Enter>
where Value = 1 ~ 255 (seconds)
Condition
This setting only apply to intercom call and do not apply to outgoing call.
Default Value
Default = 5 (seconds)
