7
4. Configuration of CM1000
4.1 The Service code
The Service code is used for CM1000’s advanced settings such as changing the Master
code and Service code, LED indications and much more. The overview of the settings
and the factory settings can be seen in 4.2 Configuration overview.
The Service code is
12347890 (factory setting).
Note: Before the Service code can be used must the voltage be turned OFF and
ON (the Service code can now be entered within 10 seconds).
After entering the Service code the reader is in programming mode (the green LED
lights). Each time a setting is made the CM1000 goes back to the previous point and
the next setting can be made.
The navigation is by entering the position/ value followed by
#.
4.2 Configuration overview
Position
Setting
Factory
default
00
Master code (1 til 8 cifre)
4711
01
Service code (1 til 8 cifre)
12347890
02
LED indications
Normal = Yellow, active = Yellow and green
03
Outputs
Output time for 1 and 2 is 5 seconds
04
Special functions
05
Smart reading
06
Background light
08
Backup/cloning the settings
2500
Alle codes/Mifare tags on the user positions are deleted
0250
Reset to factory default
4.3 Change the Master code
By default the Master code is
4711 and can only be used to program, change or delete
users on the CM1000.
To change the Master code, enter the following:
#
Key in the
Service code
#
Key in
00
#
Key in a new
code or show tag
