3
1. Introduction
CM1000 is a flexible keypad and Mifare reader in one unit for many different applica-
tions.
In standby the yellow LED is lit LED (
)
Correct code/tag lights the yellow and the green LED (
)
Incorrect code/tag lights the red LED (
)
CM1000 has a buzzer for indicating while keying, correct code/tag, incorrect etc. and
2 transistor outputs, independant from each other, so the CM1000 can give access by
code and Mifare tag. The CM1000 is a stand alone unit that can be programmed
directly by Master code and Service code.
2. Installation
Mount the reader on a even surface. (use the following drill template for precise fit-
ting).
Connect the wires to power supply, door strike, assembly board etc.
Colour scheme
Note: Right after applying the voltage all LED’s lights and the buzzer sounds do not
touch the reader untill the yellow LED lights and the buzzer is silent.
See connection examples on the last page.
