4.7 Special settings
These settings is used to change the CM1000’s special functions such as turning the
buzzer on/off, enable High Security etc.
To change these settings, key in:
= Service code without timeout (
= inactive /
= active)
= Master code be changed by Master code (
= inactive /
= active)
= Mute reader (
= off /
= on)
= Brown wire function (
= external buzzer /
= High Security)
= High Security (
= inactive /
= active)
= Bell/star key (
= delete non-finished codes /
= activates output 1*)
*When the bell/star key is set to activate output 1 can codes and Mifare tags only activate output 2.
High Security
High Security increases the CM1000’s security by ensuring 2 positions have to be acti-
vated before the output is activated (the positions must be next to each other).
Special positions
On positions 191 to 194 special functions can be activated by code/Mifare tag. The
programming is like programming a new user.
191 = No buzzer
192 = Input 1 (brown wire) function (High Security or external buzzer)
193 = High Security
194 = Bell/star key function (activates output 2 by press)
To save the settings press
or press
/
to go back to the previous
point (not saving).
Note: A power cucle puts the functions back to the settings made by the Service code.
10
#
04
1
2
3
4
5
6
#
*
