™
Specifications:
Sample Wiring Diagram:
Operating voltage
9~25 VDC
Current
draw
Standby
29mA@12VDC, 16mA@24VDC
Active (max.)
34mA@12VDC, 20mA@24VDC
Outputs
Form C
2.5A@30VDC (Solid state relay)
Alarm
50mA@30VDC
Egress input
N.O. Ground
Door sensor input
N.C. Ground
IP Rating
IP65 Weather-resistant
Enclosure material
Zinc alloy
Operating humidity
0-95%, non-condensing
Operating temperature
-4°~122° F (-20°~50° C)
Dimensions
3
1
/
8
"x4
13
/
16
"x
7
/
8
" (79x123x23 mm)
Weight
1-lb 4.9-oz (593g)
1x SK-B141-DQ ENFORCER
Bluetooth
®
Single-Gang Keypad
4x
Mounting screws
4x
Plastic wall anchors
12x
Wire crimps
1x
Diode
1x
Varistor
1x
Security screw bit
1x
Quick Installation/Setup Guide
1x
Additional Information
Bluetooth
®
Single-Gang Keypad
SK-B141-DQ
Additional Information
What's in
the Box:
™
SL Access
–
+
or
†
+ Lock –
MOV
*
Red – power (+)
Black – power (–)
Yellow – N.C. fail-safe
White – COM
Blue – N.O. fail-secure
Green pair – RTE button
Brown pair – door sensor
IMPORTANT NOTES:
*
Because the keypad uses a solid-state relay, you must install the enclosed diode—with the cathode (striped
end
) toward the positive side—for DC powered locks and install the varistor (MOV,
)
for AC powered locks and for electromagnetic locks
unless your lock has a diode/MOV built in
. Failure to
use these as directed will void the warranty.
†
Use the blue wire for fail-secure applications and the yellow wire for fail-safe applications. Use electrical
tape to insulate the end of any unused wire.
Orange pair – external alarm
Power
Supply
12/24 VDC
Diode
*
Cathode
