Copyright
©
2016
congatec
AG
TR33m10
77/105
Feature
Options
Description
Automatic Fan Speed Control
Enabled
Disabled
Enable or disable automatic fan speed control performed by board controller.
Fan Control Temperature
CPU Temperature
Board Temperature
Select the temperature sensor used for fan speed control.
Lower Temperature Limit
Default:
50 C
10 – 90 C
Lower limit of temperature-based fan control range.
Upper Temperature Limit
Default:
80 C
10 – 90 C
Upper limit of temperature-based fan control range.
Minimum fan speed
Default:
40 %
0 – 100%
Fan speed to be set if the temperature is below the lower limit
Mid Range Bottom Fan Speed
Default:
60 %
0 – 100%
Fan speed to be set if the temperature is within the lower area of control range
Mid Range Top Fan Speed
Default:
80 %
0 – 100%
Fan speed to be set if the temperature is within the upper area of control range
Maximum fan speed
Default:
100 %
0 – 100%
Fan speed to be set if the temperature is above the upper limit
11.3.4
Watchdog Submenu
Feature
Options
Description
POST Watchdog
Disabled
30sec
1min
2min
5min
10min
30min
Select the timeout value for the POST watchdog.
The watchdog is only active during the power-on-self-test of the system and provides a facility to
prevent errors during boot up by performing a reset.
Stop Watchdog For User Interaction
No
Yes
Select whether the POST watchdog should be stopped during the popup boot selection menu or
while waiting for setup password insertion.
Runtime Watchdog
Disabled
One-time Trigger
Single Event
Repeated Event
Selects the operating mode of the runtime watchdog.
This watchdog will be initialized just before the operating system starts booting.
If set to 'One-time Trigger' the watchdog will be disabled after the first trigger.
If set to 'Single Event', every stage will be executed only once, then the watchdog will be disabled.
If set to 'Repeated Event' the last stage will be executed repeatedly until a reset occurs.
