![Congatec COM Express conga-TR3 User Manual Download Page 44](http://html1.mh-extra.com/html/congatec/com-express-conga-tr3/com-express-conga-tr3_user-manual_2652461044.webp)
Copyright
©
2016
congatec
AG
TR33m10
44/105
9.1
A-B Connector Signal Descriptions
Table 12
High Definition Audio Link Signals Descriptions
Signal
Pin #
Description
I/O
PU/PD Comment
AC/HDA_RST#
A30
High Definition Audio Reset: This signal is the master hardware reset to external codec(s). O 3.3VSB
AC’97 codecs are not supported.
AC/HDA_SYNC
A29
High Definition Audio Sync: This signal is a 48 kHz fixed rate sample sync to the codec(s).
It is also used to encode the stream number.
O 3.3VSB
AC’97 codecs are not supported.
AC/HDA_BITCLK
A32
High Definition Audio Bit Clock Output: This signal is a 24.000MHz serial data clock
generated by the High Definition Audio controller.
O 3.3VSB
AC’97 codecs are not supported.
AC/HDA_SDOUT
A33
High Definition Audio Serial Data Out: This signal is the serial TDM data output to the
codec(s). This serial output is double-pumped for a bit rate of 48 Mb/s for High Definition
Audio.
O 3.3VSB
AC’97 codecs are not supported.
AC/HDA_SDIN[2:0] B28-B30 High Definition Audio Serial Data In [0]: These signals are serial TDM data inputs from
the three codecs. The serial input is single-pumped for a bit rate of 24 Mb/s for High
Definition Audio.
I 3.3VSB
PD 47K
AC’97 codecs are not supported.
Table 13
Testing
Table 14
Gigabit Ethernet Signal Descriptions
Gigabit Ethernet Pin # Description
I/O
PU/PD Comment
GB
GBE0_MDI0-
GB
GBE0_MDI1-
GB
GBE0_MDI2-
GB
GBE0_MDI3-
A13
A12
A10
A9
A7
A6
A3
A2
Gigabit Ethernet Controller 0: Media Dependent Interface Differential
Pairs 0, 1, 2, 3. The MDI can operate in 1000, 100, and 10Mbit/sec
modes. Some pairs are unused in some modes according to the
following:
I/O
Analog
Twisted pair signals for external transformer.
1000
100
10
MDI[0]+/-
B1_DA+/-
TX+/-
TX+/-
MDI[1]+/-
B1_DB+/-
RX+/-
RX+/-
MDI[2]+/-
B1_DC+/-
MDI[3]+/-
B1_DD+/-
GBE0_ACT#
B2
Gigabit Ethernet Controller 0 activity indicator, active low.
O 3.3VSB
GBE0_LINK#
A8
Gigabit Ethernet Controller 0 link indicator, active low.
O 3.3VSB
GBE0_LINK100#
A4
Gigabit Ethernet Controller 0 100Mbit/sec link indicator, active low.
O 3.3VSB
GBE0_LINK1000#
A5
Gigabit Ethernet Controller 0 1000Mbit/sec link indicator, active low. O 3.3VSB