background image

Copyright 

© 

2016 

congatec 

AG 

 

      TR33m10 

 

      

37/105

For more information about this subject visit the congatec website and view the following documents:

 

congatec Battery Management Interface Specification

 

Battery System Design Guide

 

conga-SBM

3

 User’s Guide

7.4 

API Support (CGOS)

In order to benefit from the above mentioned non-industry standard feature set, congatec provides an API that allows application software 
developers to easily integrate all these features into their code. The CGOS API (congatec Operating System Application Programming 
Interface) is the congatec proprietary API that is available for all commonly used Operating Systems such as Win32, Win64, Win CE, Linux. 
The architecture of the CGOS API driver provides the ability to write application software that runs unmodified on all congatec CPU modules. 
All the hardware related code is contained within the congatec embedded BIOS on the module. See section 1.1 of the CGOS API software 
developers guide, which is available on the congatec website . 

7.5 

Security Features

The conga-TR3 can be equipped optionally with a “Trusted Platform Module“ (TPM 1.2/2.0). This TPM 1.2/2.0 includes coprocessors to calculate 
efficient hash and RSA algorithms with key lengths up to 2,048 bits as well as a real random number generator. Security sensitive applications 
like gaming and e-commerce will benefit also with improved authentication, integrity and confidence levels. 

7.6 

Suspend to Ram

The Suspend to RAM feature is available on the conga-TR3.

Summary of Contents for COM Express conga-TR3










































































































Reviews: