Copyright
©
2018
congatec
AG
TR44m17
63/65
0Ah
00h
00h
Intel PCIe Ethernet Network on Module
0Bh (see Note 3)
00h
00h
PCI Express Port 7
Bus A
00h
00h
Internal
Internal GPU
Bus A
00h
01h
Internal
Display HD Audio Controller
Bus A
00h
02h
Internal
Cryptographic Coprocessor
Bus A
00h
03h
Internal
USB 3.1
Bus A
00h
04h
Internal
USB 3.1
Bus A
00h
05h
Internal
Audio Processor
Bus A
00h
06h
Internal
Audio Processor – HD Audio Controller
Bus A
00h
07h
Internal
SCSI PCIe
Bus B
00h
00h
Internal
SATA AHCI Mode
Note
1. The PCI Express Ports may only be visible if the PCI Express Port is set to “Enabled” in BIOS setup and a device is attached to the
corresponding PCI Express port on the carrier board.
2. The PCI Express Graphics Ports may only be visible if the PCI Express Graphics Port is set to “Enabled” in BIOS setup and a device is
attached to the corresponding PCI Express port on the carrier board.
3. The above table represents a case when a single function PCI Express device is connected to all possible slots on the carrier board. The
given bus numbers will change based on actual hardware configuration.
4. The PCI Express Port may only be visible if PEG port is set to 2 x4 and a device is attached to the corresponding PCI Express port on the
carrier board.
9.3
I²C Bus
There are no on-board resources connected to the I²C bus. Address 16h is reserved for congatec Battery Management solutions.
9.4
SM Bus
System Management (SM) bus signals are connected to the AMD Chipset and the SM bus is not intended to be used by off-board non-system
management devices. For more information about this subject please contact congatec technical support.
