11
Operator Interface
Condair TE
Table 2:
Light indication on the remote controller (normal operation)
- light off
○ light on
Operational State
B
C
D
E
Humidifying
(humidistat on)
Humidifying
(humidistat off)
Drying
Not
Humidifying
Humidistat
Present
Same for humidistat present /
not present
Fan High/Low
High
Low
High
Low
Common to
high or low
Common to
high or low
Indicator light
(5) Power light
○
○
○
○
-
-
(6) Humid. light
○
○
-
-
-
-
(7) High fan light
○
-
○
-
-
-
(8) Low fan light
-
○
-
○
-
-
(9) Drying mode light
-
-
-
-
○
-
(10) Alarm light
-
-
-
-
-
-
B
: If there is a humidistat and humidistat contact is ON, the unit uses humidification operation type B.
C
: If the humidistat is turned OFF during type B operation, the unit enters standby mode (C). If the humidistat is then turned
ON, the unit returns to humidification operation type B.
D
: If the operation button is pressed during humidification operation type B or during standby mode (C), regular operation
stops and the unit enters drying operation (D).
E
: After regular operation has stopped and drying operation (D) has been completed, the unit automatically stops all opera
-
tion (E).
After powering off of the humidifier unit (via pressing of the remote controller’s power button, or an
external command signal input), and then powering on the unit again, the fan will restart at the speed
it was on just before powering off.
