42
Operating the Condair DL control software
5.3.4.2 Control settings in the "Signal Settings" submenu
09/01/2021
DL
07:00 pm
Source
Control Mode
Signal Type Control
Setpoint
I-Time
P-Band
Lower Limit Hum.
Enable Contact
P-Band
Analog
rF PI
0-10V
40 %
5 min
15 %
3 %
On
15 %
Signal Settings
–
Source:
With this setting you determine whether the control signal comes
from an analog source "Analog" (humidity sensor, demand signal from an
external humidity controller), a BMS (building management system) via
"Modbus", "BACnet" or via "IoT".
Factory setting:
Analog
Options:
Analog
(Analog sensor-/humidity signal)
Modbus
(Signal via Modbus)
BACnet
(Signal via BACnet)
IoT
(Signal via IoT)
–
Control Mode:
with this setting you determine the type of controller used
with the humidification system Condair DL.
Factory setting:
Demand
Options:
On/Off
(external On/Off humidistat)
Demand
(external continuous controller)
RH P
(internal P controller)
RH PI
(internal PI controller)
–
Signal Type Control:
with this setting you determine the control signal
with which the humidification system is controlled.
Note
: this setting appears only if "Control Mode" is set to "Demand", "RH
P" or "RH PI".
Factory setting:
0-10 V
Options:
0-5 V, 1-5 V
,
0-10 V
,
2-10 V
,
0-16 V
,
3.2-16 V
,
0-20 V, 4-20 V, 0-20mA
,
4-20mA
–
Setpoint:
with this setting you set the humidity setpoint for the internal P/
PI controller in % relative humidity.
Note
: this setting appears only if the "Control Mode" is set to "RH P" or
"RH PI".
Factory setting:
40 %rh
Options:
5 ... 95 %rh
–
P-Band:
with this setting you set the proportional range for the internal
P/PI controller in % relative humidity.
Note
: this setting appears only if the "Control Mode" is set to "RH P" or
"RH PI".
Factory setting:
15 %rh
Options:
6 ... 65 %rh
–
I-Time:
with this setting you set the integral time for the internal P/PI
controller.
Note
: this setting appears only if the "Control Mode" is set to "RH PI".
Factory setting:
5 minutes
Options:
1 ... 60 minutes
Summary of Contents for DL II
Page 79: ......