72
Fault elimination
7.6
Resetting malfunction indication
To reset the malfunction indication, proceed as follows:
Network
09/01/2021
DL
07:00 pm
Menu
General
Maintenance
Features
Controls
09/01/2021
DL
07:00 pm
Home
Next Maintenance
1685 hr
Demand
Standby
0%
USB Data Logger
Reset
Update
Histories
Error Analyzer
09/01/2021
DL
07:00 pm
Maintenance
09/01/2021
DL
07:00 pm
1001
Password
1
2
3
4
5
6
7
8
9
0
****
Passwort:
"8808"
Ag-Ion Reset
Error/Warning Reset
Factory Reset
09/01/2021
DL
07:00 pm
Reset
09/01/2021
DL
07:00 pm
Error/Warning Reset
Do you really want to continue?
Back
Continue
1. Select in the "Error/Warning Reset" function (Path: "Menu > Password: 8808 > Maintenance > Re-
set > Error/Warning Reset").
2. The reset confirmation dialog appears:
• Press the
<Continue>
button to reset the malfunction indication(s).
• Press the
<Back>
button to abort the reset procedure. The control unit returns to the "Reset"
submenu.
If the malfunction indication cannot be reset via the control software (e.g., the display hangs), proceed
as follows to reset the malfunction indication(s):
1. Disconnect the control unit from the mains via the
<Control unit On/Off>
switch (located on the
right side of the control unit).
2. Wait approx. 10 seconds, then reconnect the control unit to the mains by switching the
<Control
unit On/Off>
switch again.
Note: If the cause of the malfuntion(s) has/have not been eliminated, the malfunction indication(s)
reappear(s) after a short while.
Summary of Contents for DL II
Page 79: ......
