Concurrent Technologies VP 110/01 Series, Technical Reference Manual

Page: 35 / 150

3.3 Installing Windows NT
®
4.0
To install Windows NT from CD-ROM, set up the board initially using the steps outlined in
Sections 3.1 and 3.2 above, ensuring that all the necessary drives are connected. Then follow
the procedure below.
1) Obtain the Ethernet driver from the Intel web site, starting from the following address:
http://developer.intel.com/design/network/drivers
and selecting the
82551ER and 82559ER NDIS4 drivers. Download the driver file and run
it to extract the contents to a diskette.
2) Power up the system and insert the Windows NT CD.
3) Allow Windows to boot and wait for the “Welcome to Setup” screen to appear. When
prompted, press S to skip automatic detection of mass storage controllers and select “IDE
CD-ROM (ATAPI 1.2)/PCI IDE Controller”. Press <Enter> to continue.
4) Setup will continue and report that it is loading drivers for the appropriate mass storage
devices. Press <Enter> again to resume the normal Windows Setup sequence.
5) Allow Windows Setup to continue with the normal setup procedure up to the point where
Windows prompts to know if “the computer will participate on a network”.
6) Select “this computer will participate on a network” then click the “Next” button.
7) When the Network Adapter screen is displayed click the “Select From List” button.
8) On the Select Network Adapter screen click the “Have Disk” button.
9) Insert the floppy disk containing the Intel 82559ER driver and click the “OK” button.
10) When the Select OEM Options screen is displayed select the “Intel GD82559ER Fast
Ethernet Adapter” from the list then click the “OK” button.
11) When returned to the Network Adapter screen click the “Next” button.
12) Continue with the installation of Windows NT in the normal way.
Software Installation
VP 110/01x 3-3