Concoa Advantium 16, Installation And Operating Instructions Manual, Page: 22 / 28

20
E-MAIL ALERTS PAGE
The Advantium 16 e-mail alerts page shows the current configuration for the system
email alerts. Each row represents the configuration for the email alert of that input
number. The settings may be changed by entering the appropriate value in the text box,
selecting the appropriate value from the drop-down box, or clicking the appropriate check
box and clicking the set button. The cancel button will restore the current settings if any
have been made in the browser but not committed. Options common to all e-mail alerts
(such as network settings, relay information, sender, and reply-to) may be configured in
the Networking page.
If an alert is disabled, an email will not be sent regardless of the input conditions
associated with the alert.
“Condition” indicates whether an email alert will be triggered when the described alarm
condition occurs, when it is cleared, or both. Note that emails are sent only on the change
of the entire state, not individual inputs.
The source indicates whether individual input relays or input groups should be used to
determine whether the e-mail alert will be triggered. If "Relay" is chosen, the numbers at
the right of the row (1-16) correspond to the number of the input relay (see the
Inputs
settings page for configuration information). If "Group" is chosen, the numbers at the
right of the row (1-16) correspond to the number of the input group (see the
Inputs
settings page for configuration information).
The event indicates the condition in which the email alert will be triggered. If “All” is
selected, then all of the selected inputs must enter alarm condition for the alert to be
triggered. If “Any” is chosen, then any of the selected relays entering alarm condition
will cause the alert to trigger.
Each input checked will be monitored for alarm if enabled. If the selected input is
disabled, it will be ignored.
If “Non-relay Events” is checked, then the alert will also be triggered by any change in
alarm condition unrelated to the selected inputs. These events include alarm silence and
web based configuration changes.
The Subject text box adds a customizable subject to the email alert and the “To:” allows
the user to assign recipients. Multiple email addresses are permissible in the “To” field
and should be separated by a semicolon. There is a 256 character limit to the “To” string.
Figure 19