Concoa Advantium 16, Installation And Operating Instructions Manual, Page: 15 / 28

13
MUTING AUDIBLE ALARM
It is sometimes desirable to silence the audible alarm on the Advantium 16. This can be
accomplished in one of two ways.
1) Temporarily silence the alarm simply pressing the alarm silence button on the top
right hand side of the front panel. In this mode the audible alarm will
automatically sound on the next asserted alarm
2)
Permanently silence the alarm by pressing and holding the alarm silence for five
seconds. The speaker will sound twice indicating alarm disable state. In this mode
the audible alarm will never sound. In order to re-enable the audio alarm, press
and hold the alarm for five seconds again. The speaker will sound once indicating
the audio alarm is enabled.
REAL TIME CLOCK
The Advantium 16 has a battery backed real-time clock (RTC). The Advantium 16 uses
a 357 coin battery with a nominal voltage of 1.55 V. Using typical current capacity, the
RTC is expected to have 120,000 backup hours. The battery is mounted inside a holder
attached to the board to allow battery replacement or remova1. To set the date and time,
click the Change Settings tab in the Advantium 16’s webserver. On the Configuration
page, enter the date in the format YYYY/MM/DD. The time should be entered as
HH:MM, with a leading zero for the first nine hours. Click “SET” to submit.
Figure 12