![background image](http://html.mh-extra.com/html/conair/sc-5-servo/sc-5-servo_user-manual_2649056029.webp)
I
NSTALLATION
3-9
UGE059/1003
SC-5 SURE CUT Servo Knife Cutter
TIP: We recommend that you:
●
Apply some protective cover on the portion of
the blade you are handling, such as masking tape
to help prevent getting cut during installation and to
leave it on until such time that you will start and
check the cutting operation.
●
Check the length that the blade extends out of
the cutter blade wheel. The blade needs to be
carefully checked to insure that the entire blade will
pass completely through the product.
This is especially important with the very first insta-
llation and can be accomplished by rotating the
wheel with the blade installed manually though the
bushing and visually check to see that it will com-
pletely cover the entire bore of the bushing.
I
NSTALLING THE
C
UTTER
B
LADES
C
ONTINUED
CAUTION: Never attempt to change or work on
blades without first locking out power to the
machine.
CAUTION: Use extreme caution as the blades
will be very sharp. With the power off, the blade
wheel can spin freely.