manualshive.com logo in svg

Comtrend Corporation VR-3071 Series, User Manual

Share
Download
Comtrend Corporation VR-3071 Series User Manual Download Page 82

 

 

 

81 

6.1.2 MAC Filtering 

 
NOTE: 

This option is only available in WDS mode. Other modes use 

IP Filtering

 to 

perform a similar function. 

 

Each network device has a unique 48-bit MAC address. This can be used to filter 
(block or forward) packets based on the originating device. MAC filtering policy and 

rules for the VR-3071 can be set according to the following procedure.   
 
The MAC Filtering Global Policy is defined as follows. FORWARDED means that all 

MAC layer frames will be FORWARDED except those matching the MAC filter rules.   
BLOCKED means that all MAC layer frames will be BLOCKED except those 

matching the MAC filter rules. The default MAC Filtering Global policy is 
FORWARDED. It can be changed by clicking the Change Policy button. 

 
 

 

 
Choose Add or Remove to configure MAC filtering rules. The following screen will 
appear when you click Add. Create a filter to identify the MAC layer frames by 
specifying at least one condition below. If multiple conditions are specified, all of 

them must be met.   

Summary of Contents for VR-3071 Series




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands