Comtrend Corporation VR-3071 Series User Manual Download Page 138

Page: 138 / 227

137

7.2 Ethernet OAM

The Ethernet OAM (Operations, Administration, Management) page provides

settings to enable/disable 802.3ah, 802.1ag/Y1.731 OAM protocols.

To enable Ethernet Link OAM (802.3 ah), click Enabled to display the full
configuration list. At least one option must be enabled for 802.1ah.

Item

Description

WAN Interface

Select layer 2 WAN interface for outgoing OAM packets

OAM ID

OAM Identification number

Auto Event

Supports OAM auto event

Variable Retrieval

Supports OAM variable retrieval

Link Events

Supports OAM link events

Remote Loopback

Supports OAM remove loopback

Active mode

Supports OAM active mode

Summary of Contents for VR-3071 Series




































































































































































































































Search results

Summary of Contents for VR-3071 Series

Reviews:

Brands by name

Popular brands

Comtrend Corporation VR-3071 Series, User Manual

Search results

Summary of Contents for VR-3071 Series

Reviews:

Brands by name

Popular brands