Comtrend Corporation CT-6373, User Manual

Page: 55 / 123

NOTE: Only the Bridge PVC is shown on the Port Mapping configuration. It is in
the format of “nas_x_y_z” where x=port, y=vpi, and z=vci.
To continue, click the
Add button at the bottom of the screen shown above. On the
screen shown below, select the bridge connection and one Ethernet virtual port
(ENET 1-4). Enter a group name, such as “MSP1”, and click
Save/Apply .
If successfully configured, the Port Mapping screen will display as follows.
54