Comtrend Corporation CT-6373, User Manual

Page: 95 / 123

Forwarding all calls Tick the checkbox to enable this option
Call forwarding if no answer Tick the checkbox to enable this option
Call waiting (default: enabled ) Tick the checkbox to enable this option
NOTE: These options can also be set using telephone keypad commands,
as described in the call command list of
section 8.2 .
Enable MWI Subscription
Enable or disable Message-Waiting Indicator (MWI) for
FXS Phones with this checkbox.
Enable T.38 support
Enable or disable T.38 Fax mode support with this
checkbox. You can plug a fax machine into either
phone port to send or receive faxes. Functionality
depends upon FAX support by your VoIP service
provider.
Max Digits Sets the maximum number of digits for a phone
number.
Emergency Setting Multiple emergency numbers can be set using the “|”
character (shift + backslash). For example, to set 911
and 114 as emergency numbers, enter “911|114”.
Please Note: These numbers must be changed to
correspond to the emergency numbers that are used in
your location.
Dtmf Relay Setting Set the special use of RTP packets to transmit digit
events.
SIP Transport Protocol Set the special use of SIP protocol to transmit digit
events.
Incoming PSTN Call
Routing
If PSTN route rule is Auto , an incoming PSTN call will
ring an idle phone, either Phone1 or Phone2 (if Phone1
is busy).
If PSTN route rule is
Line1 or Line2 , an incoming PSTN
call will attempt to ring only the assigned phone line
(FXS1 or FXS2).
If PSTN route rule is
VoIP , an incoming PSTN call will
attempt to ring another VoIP phone. The VoIP phone
number for routing is set using the options shown
below (see the table in
section 8.1.1 for header
definitions).
Enable SIP tag matching Select if required by your VoIP provider. (e.g. disable
with Vonage service.)
Enable Music Server Enable/disable the Music Server. If enabled, enter an IP
address and port.
94