Comtrend Corporation CT-6373, User Manual

Page: 32 / 123

Step 6: Upon completion click Next . The following screen appears.
Consult the following paragraphs for more details about these settings.
The Device Setup screen allows the user to configure the LAN interface IP address
and DHCP server. If the user would like this router to assign dynamic IP addresses,
DNS server and default gateway to other LAN devices, select the radio box
Enable
DHCP server to enter the starting IP address and end IP address and DHCP lease
time. This configures the router to automatically assign IP addresses, default
gateway address and DNS server addresses to each of your PCs.
Select
Enable DHCP Server Relay (if required), and enter the DHCP Server IP
Address. This allows the router to relay the DHCP packets from the remote DHCP
server. The remote DHCP server will provide the IP address.
NOTE: If NAT is enabled, Enable DHCP Server Relay won’t display.
To configure a secondary IP address for the LAN port, tick the checkbox shown.
31