Comtrend Corporation CT-6373, User Manual

Page: 27 / 123

• NAT and firewall are disabled when this option is selected.
• The router becomes the default gateway and DNS server to the PC through
DHCP using the LAN interface IP address.
• The router extends the IP subnet at the remote service provider to the LAN PC.
That is, the PC becomes a host belonging to the same IP subnet.
• The router bridges the IP packets between WAN and LAN ports, unless the
packet is addressed to the router’s LAN IP address.
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
Retry PPP password on authentication error
Tick the box to select.
Enable PPP Debug Mode
Enable the PPPoE debug mode. The system will put more PPP connection
information in System Log. But this is for debug, please don't enable in normal
usage.
Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled)
If Enabled, the function can create a local PPPoE connection to the WAN side.
STEP 5: Click Next to display the following screen.
Enable IGMP Multicast checkbox:
Tick the checkbox to enable IGMP multicast (proxy). IGMP (Internet Group
Membership Protocol) is a protocol used by IP hosts to report their multicast group
memberships to any immediately neighboring multicast routers.
Enable WAN Service checkbox:
Tick this item to enable the ATM service. Untick it to stop the ATM service.
Service Name:
This is user-defined.
26