Comtrend Corporation CT-6373, User Manual

Page: 36 / 123

server will provide the IP address.
NOTE: If NAT is enabled, Enable DHCP Server Relay won’t display.
To configure a secondary IP address for the LAN port, click the box as shown below.
STEP 7: Click Next to continue. To enable the wireless function, select the radio
button (as shown), input a new SSID (if desired) and click Next .
The following screen will be displayed.
Step 8:
The WAN Setup-Summary screen presents the entire configuration
summary. After clicking Save/Reboot , the router will save the
configuration to the flash memory, and reboot. Click Back if you wish to
modify the settings. The Web UI will not respond until the system is
35