LAN PC. That is, the PC becomes a host belonging to the same IP subnet.
•
The ADSL router bridges the IP packets between WAN and LAN ports, unless
the packet is addressed to the router’s LAN IP address.
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
Enable PPP Debug Mode
Tick the checkbox to enable this function.
Step 2:
Click
Next
to display the screen below.
Enable IGMP Multicast checkbox:
Tick the checkbox to enable IGMP multicast
(proxy). IGMP (Internet Group Membership Protocol) is a protocol used by IP
hosts to report their multicast group memberships to any immediately
neighboring multicast routers.
Enable WAN Service checkbox:
Tick this item to enable the ATM service.
Untick it to stop the ATM service.
Service Name:
This is user-defined.
Step 3:
After entering your settings, click
Next
. The following screen appears.
The Device Setup screen allows the user to configure the LAN interface
IP address, subnet mask and DHCP server. If the user would like this
ADSL router to assign dynamic IP addresses, DNS server and default
gateway to other LAN devices, select the radio box
Enable DHCP
server
and enter the Start/End IP addresses and DHCP lease time.
This configures the router to automatically assign IP addresses, default
gateway address and DNS server addresses to each of your PCs.
24
