Maximize Reliability, Maximize Throughput, Minimize
Delay
Mark 802.1p if 802.1q is
enabled on WAN
Select between 1-7. The lower the digit shows the
higher the priority
Physical LAN Port
User can select from: ENET, ENET(1-4), USB or
Wireless.
Protocol
User can select from: TCP, TCP/UDP, UDP or ICMP.
Source IP Address
Enter the source IP address.
Source Subnet Mask
Enter the subnet mask for the source IP address.
UDP/TCP Source Port
(port or port:port)
Enter source port number.
Destination IP address
Enter destination IP address.
Destination Subnet Mask Enter destination subnet mask.
UDP/TCP Destination port
(port or port:port)
Enter destination port number.
802.1p Priority
Select between 0-7. The lower the digit shows the
higher the priority
6.6 Routing
The Routing dialog box allows you to configure Default gateway and Static Route.
6.6.1 Default
Gateway
If
Enable Automatic Assigned Default Gateway
checkbox is selected, this
router will accept the first received default gateway assignment from one of the
PPPoA, PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected, enter
the static default gateway AND/OR a WAN interface. Click
Save/Apply
button to
save it.
NOTE:
After enabling Automatic Assigned Default Gateway, the router must be
enabled to get the automatic assigned default gateway.
56
