NOTE :
Enable DHCP Server Relay will not display if NAT is enabled.
The user must configure the IP Address and the Subnet Mask. To use the DHCP
service on the LAN, select the
Enable DHCP server
checkbox, and enter the
Start IP addresses, the End IP address and DHCP lease time. This configures the
router to automatically assign IP addresses, default gateway address and DNS
server addresses to each of your PCs. Select
Enable DHCP Server Relay
(if
required), and enter the DHCP Server IP Address.
Step 4:
The WAN Setup-Summary screen presents the entire configuration
summary. Click
Save/Reboot
if the settings are correct. Click
Back
to modify the settings.
31
