Step 5:
After clicking
Save/Reboot
, the router will save the configuration to
the flash memory, and reboot. The Web UI will not respond until the
system is brought up again. After the system is up, the Web UI will
refresh to the Device Info screen automatically. The CT-5611TC is
ready for operation and the LEDs display as described in the LED
description tables.
4.2.4 Bridging
Step 1:
Tick the checkbox to
Enable Bridge Service
and enter a Service Name.
Step 2:
Click the
Next
button to continue. Enter the IP address for the LAN
interface. The LAN IP interface in bridge operating mode is needed for
local users to manage the ADSL router. Notice that there is no IP
address for the WAN interface and therefore remote technical support is
not available when in bridge mode.
32
