149
E1.2 PTM Interfaces
Follow these procedures to configure a PTM interface.
NOTE
: The AR-5319 supports up to four PTM interfaces.
STEP 1:
Go to Basic Setup
WAN Setup
Select PTM Interface from the
drop-down menu.
This table is provided here for ease of reference.
Heading
Description
Interface
WAN interface name.
DSL Latency
{Path0}
portID = 0
PTM Priority
Normal or High Priority (Preemption).
Connection Mode
Default Mode – Single service over one interface.
Vlan Mux Mode – Multiple Vlan services over one interface.
IP QoS
Quality of Service (QoS) status.
Remove
Select interfaces to remove.
STEP 2:
Click
Add
to proceed to the next screen.
NOTE:
To add WAN connections to one interface type, you must delete existing
connections from the other interface type using the
remove
button.
Summary of Contents for AR-5319
