145
Appendix E - Connection Setup
Creating a WAN connection is a two-stage process.
1 -
Setup a Layer 2 Interface (ATM, PTM or Ethernet).
2 -
Add a WAN connection to the Layer 2 Interface.
The following sections describe each stage in turn.
E1 ~ Layer 2 Interfaces
Every layer2 interface operates in Multi-Service Connection (VLAN MUX) mode,
which supports multiple connections over a single interface. Note that PPPoA and
IPoA connection types are not supported for Ethernet WAN interfaces. After adding
WAN connections to an interface, you must also create an Interface Group to
connect LAN/WAN interfaces.
E1.1 ATM Interfaces
Follow these procedures to configure an ATM interface.
NOTE
:
The AR-5319 supports up to 16 ATM interfaces.
STEP 1:
Go to Basic Setup
WAN Setup
Select ATM Interface from the
drop-down menu.
Summary of Contents for AR-5319
