Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI)
Revision 1
Device Management via User Interfaces
MN-CMR5995-IOM
4-15
4.2.10
Unicast Routing Configuration
The Unicast Routing Configuration page addresses the CMR-5995’s configuration for handling
Unicast traffic over the transport stream. This feature is only used in the MPE/IP configuration.
Allow Unicast
Selects whether the CMR-5995 will support the routing of Unicast traffic.
Route unknown to default gateway
When selected, all incoming Unicast that is not destined for the CMR-5995 local network subnet
will be directed to the configured default gateway.
Filter on Satellite MAC (MPE/IP)
The hardware Media Access Control (MAC) address assigned for Unicast operation. When the
satellite MAC is defined, the CMR-5995 will only route Unicast traffic that is specifically
addressed to the satellite MAC. This value does not affect the characteristics of multicast data
flow.
Digicast receivers do not need to filter on MAC. Some third party encapsulators/receivers may
need to filter on MAC, and if the MAC is configured on the Encapsulator for a Unicast Route.
