Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI)
Revision 1
Device Management via User Interfaces
MN-CMR5995-IOM
4-35
System Location
The physical location where the unit has been installed.
SNMP IP Address
Defines the SNMP server where traps are sent.
SNMP R/W Community
The community name for authentication for read/write access to the private MIB.
SNMP R/O Community
The community name for authentication for read only access to the private MIB.
Enable Telnet
Enables Telnet application on the CMR-5995.
Display Config
Outputs the overall configuration of the receiver (verbose).
Download Image
Allows software/firmware changes to be made. User name and password is required for security.
Reset Unit
Reboots the receiver.
Load Factory Defaults
Resets all settings (except network) to factory default settings.
