Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI)
Revision 1
Installation & Initial Configuration
MN-CMR5995-IOM
2-4
2.5
Connect External Cables
If the CMR-5995 is not going to power an LNB, then the LNB power should be set to
output 0 VDC (no output), or insert a DC-Block inline between the L-Band interface and
any external device.
Should there be any question about the LNB, please contact the Comtech EF Data
support group.
Descriptions of the interface connector pinouts are provided in
Chapter 3, Interface
Pinouts
.
IMPORTANT
Exercise caution when connecting the CMR-5995 LNB connection. The L-Band interface receives the
L-Band input, but also outputs 13 VDC or 18 VDC @ 600mA.
