Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI)
Revision 1
Configuring and Controlling the Digicast CMR
‑
5975 Media Router with SNMP
MN-CMR5995-IOM
E–11
E.5.1
Private MIB OIDs on Digicast Products
The following describes how the Enterprise (Private) MIB elements (OIDs) can be used to obtain
(GET) information or configure (SET) a parameter on the Digicast CMR-5995 Media Router.
The Enterprise MIB elements (OIDs) are broken down as follows:
OID Number
OID
Description
GET or SET
1.3.6.1.4.1.18723.5975.1.1 dniAggregateStatsTunerStats
Tuner Statistics
GET
1.3.6.1.4.1.18723.5975.1.2 dniAggregateStatsTunerAcquiState Tuner Acquisition State GET
1.3.6.1.4.1.18723.5975.1.3 dniAggregateStatsEsNo
Es/No in dB
GET
1.3.6.1.4.1.18723.5975.1.4 dniAggregateStatsEbNo
Eb/No in dB
GET
The Enterprise Traps are broken down as follows:
Trap Name
Description
software reset
Software Reset has occurred
dropping packets
Unit is dropping packets
dropping packets cleared
Unit has stopped dropping packets
redundancy primary on
Redundancy – Primary Online
redundancy backup on
Redundancy – Backup Online
dniEbNoThreshhold
EbNo value is now set above the defined limit
dniEbNoThreshholdFail
EbNo value has fallen below the defined limit
dniRedundancyBackup
Redundant backup unit is now active
dniRedundancyPrimary
Redundant primary unit is now active
dniRedundancyModeConflict A conflict in redundancy mode has been detected
dniMPEGPIDConflict
MPEG-TS PID Conflict has occurred
dniDMAOverflow
DMA Overflow
dniDMAOverflowCleared
DMA Overflow Cleared
