Digicast Media Router S2 Receiver CMR-5995 (MR-S2-ASI)
Revision 1
Introduction
MN-CMR5995-IOM
1–2
The CMR-5995 supports:
•
DVB-S (2 to 45 Msps)
FEC Rates: 1/2, 2/3, 3/4, 5/6 and 7/8
•
DVB-S2 QPSK (2 to 32 Msps)
FEC Rates: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 and 9/10
•
DVB-S2 8PSK (2 to 32 Msps)
FEC Rates: 3/5, 2/3, 3/4, 5/6, 8/9 and 9/10
Figure 1-2. Digicast Media Router S2 Receiver – Rear Panel
1.2
Standard Features
Based on an embedded architecture, utilizing a FreeScale MPC859 CPU and eCOS Operating
System, the CMR-5995 features:
•
High Reliability
•
DVB-S and DVB-S2 L-Band Input
•
ASI Input at rates as high as 213 Mbps
•
Ethernet Output rates as high as 83 Mbps (1,500 byte packets)
•
ASI Output rates as high as 213 Mbps
•
Support for Multicast and Unicast IP datagrams
•
Supports the decapsulation of MPE
•
MPE Section Packing and Non-Section Packing on a PID-by-PID basis
•
Supports encapsulation of transport streams over IP
•
Support for all valid PIDs in 8192 range
•
Support for the configuration of 64 simultaneous PIDs
•
MPEG-2 188/204-byte operation
•
Support for 802.1Q VLAN Tags
•
IGMP for Multicast Route Announcements
•
Redundancy via the CMR-Redundancy Scheme
•
Configurable Telnet and HTTP ports for security
•
Color LEDs for status monitoring and rapid fault isolation
•
Management (monitor, control and configuration):
Web Interface
TFTP for field software/firmware upgrade
Terminal Interface
Telnet
SNMP V2 (Private and MIB II) Support
Vload
