ACCESS Product Manual
11
L
R
L
R
S
END
R
ECEIVE
S
TATUS
R
ESET
Figure 2 - Front Panel Diagram and Descriptions
16
17
18
19
16) S
end
17) r
eceIve
18) r
eSet
19) S
tAtuS
M
ono
vS
. S
tereo
P
InoutS
- A
udIo
Peak meter that displays the level of audio being sent locally into the
ACCESS, regardless of whether or not a connection is active. Proper level
is indicated by peaks driving the
Yellow LEDs
, while avoiding lighting the
Red LEDs
(which indicates clipping).
Peak meter that displays the level of audio being sent remotely when a
connection is active. Proper level is indicated by peaks driving the
Yellow
LEDs
, while avoiding lighting the
Red LEDs
(which indicates clipping).
Adjustments to this level must be made on the far end of the link.
Recessed button to send ACCESS into hardware reset mode. Approximately
30 seconds are required to reboot when this is pressed.
Indicates several states of
Ready
:
Off = Network ready, not connected to remote
Red = Network unavailable
Green = Connected to remote
Yellow = Connected to remote but no network (i.e. network connectivity
lost during connection)
Slow Red Blink = Software update in progress
Fast Red Blink = Displaying unit IP address
ACCESS uses its left channel input only for
Mono Modes
. Right channel
is ignored. Output audio is available at both the left and right outputs in
Mono Mode
.
ACCESS audio connections are balanced professional level inputs and
outputs.
Table 1 - XLR Pinout
Table 2 - AES3 Pinout
Pin 1
Ground
Pin 2
Audio +
Pin 3
Audio –
Pin 1
Ground
Pin 2
Data +
Pin 3
Data –
