Computec
CDD5.0
EN
CDD 5.0: user manual – Rev.01
Page 62/63
: the codes compliance to the maximum reversing force and to kinetic energy limit (maximum and
average), is considered at own installer responsibility, that has to measure all the necessary values with
appropriate instrumentation.
8.7
Warranty
Computec guarantees the optimal performances only if the original parts are directly sold and correctly
installed.
Computec furthermore:
-
Reserves the rights to undertakes updates of the present document, that will be downloadable
from the website reported, in its last revision
-
Inside its continuous improvement politics, it reserves the rights to implement design and materials
modification of the product.
Therefore:
parts produced or added to the Computec product, without previous Computec check or permission, or
non-original parts based on the Computec design (even if supplied by authorized retailer), cannot be
considered under warranty, as the following conditions are cannot be insured:
1.
Raw material quality control
2.
Process quality control
3.
Product quality control
4.
Compliance product test according Computec specifications (resumed in the technical data).
5.
Conformity test according to Computec specifications
8.8
Final considerations
The present user manual has been written, keeping in consideration that the company installing Computec
product, satisfies the following requirements:
-
The personnel responsible of the system installation or maintenance must apply the General and
Specific codes for safety and hygiene (89/391/CEE – 89/654/CEE – 89/656/CEE).
-
The personnel responsible of the system installation or maintenance must be familiar and trained
to the use of the Computec product
-
The devices used for the installation and maintenance, must be in optimal operating condition and
has to be calibrated when necessary (89/655/CEE)