50
ACom6
• Enter #.
• Enter your password.
• Enter again #. ACom confirms the correct password with a brief response signal.
If no password has been programmed, just enter twice # in quick succession.
The other control commands are specified in the following tables.
Examples:
❚
Select camera 3.
Press the buttons # * 1 3 #
❚
Activate the alarm inlet 6.
Press the buttons # * 2 8 1 #
Command
MFD-user code
Switch camera
# * 1 x #
x = Numbers 1 ... 6 (camera inlet)
Activate alarm
# * 2 x 1 #
x = Numbers 0 ... 8 (alarm inlet)
Deactivate alarm
# * 2 x 0 #
x = Numbers 0 ... 8 (alarm inlet)
Switch on relay
# * 3 x 1 #
x = Numbers 1 ... 2 (relay outlet)
Switch off relay
# * 3 x 0 #
x = Numbers 1 ... 2 (relay outlet)
Play back video recording
# * 4 x #
x = Numbers 01 ... 99 (File number)
Play back previous recording
# 1 #
Stop play back
# 2 #
Play back next recording
# 3 #
Delete recording
# 0 #
☞
Important
You will find more detailed information about these functions in the CMConnect
manual.
Command
MFD-service code
Enter alarm number
# # n <Number> # n = speed calling number 01 ... 50
Change user password
# # 51 <Password> # <Password> #
Change service password
# # 52 <Password> # <Password> #
Operation
