ACom6
21
(12/99)
Configure computer interface
Immediately after the start, CMCtrl begins its search for devices capable of configuration.
In order to enable the data exchange with an ACom that you have connected, you must
set up the parameters for the precise serial interface of the computer that you selected
for the connection to the ACom.
Com Port:
Serial interface of the computer to which the ACom has been connected.
Baud Rate:
Transmission speed in bits/s.
Data Bits:
Number of data bits per signal.
Parity:
Type of parity check.
Stop Bits:
Number of stop bits per signal.
☞
Important
At first, select only the COM-Port and keep the default settings.
Configuration with CMCtrl
