22
ACom6
• Select the option
Interface...
. in the system menu. A dialogue box appears on your
screen.
• Select the required settings from the list boxes.
• Finally, click
Set
to save your settings and close the window.
Language
You can select a language for the texts of the programme interface and the dialogue box-
es.
• Go to the system menu and select the option
Language...
. A dialogue box will appear
on your screen.
• Click the desired option and then
OK
to confirm your selection. The dialogue box will
be closed.
☞
Important
A change of the default language will only take effect after the next start of CM-
Ctrl.
Send Address
If the configuration involves the connection of several AComs with the interface of the
computer via an RS485-data bus, you must indicate the address of the ACom which you
are about to configure.
• Go to the system menu and select the option
Send address...
. A dialogue box will be
opened.
• Click the button with the right address.
• Click on the X in the title bar of the window to close the window.
Configuration with CMCtrl
