ACom6
31
(12/99)
The video image is divided into 242 square cells (regions). You can activate or deactivate
all cells.
For the video sensor to function properly, the following pre-conditions must be met:
❚
At least one alarm call number must have been entered for the video sensor.
❚
All cells (regions) must have been activated.
❚
The sensitivity must have been set at a value above zero.
❚
Where applicable, the master alarm must have been activated.
☞
Important
Carry out several tests if necessary to ensure that the video sensor functions
correctly.
• Click in the control box
On
to activate the video sensor.
• Set the required level of sensitivity by moving the scroll bar to the desired value (keep
the mouse button down).
• Click on either
Set
or
Clear
to either activate or deactivate all regions of the video
image for the video sensor.
Configuration with CMCtrl
