Paging Interface Adapter
7
DEFAULT USER ID and PASSWORD
The unit is shipped with a default log on
User ID
and
Password.
You should change the log on and
password before proceeding.
User Name:
comppage
Password:
pia3264
LOGGING ON TO THE PIA3264
1.
Connect the PIA to a stand alone PC using the supplied Network Cross Over cable or connect to
your network hub using the supplied Network Patch cable.
2. Apply power to the PIA and turn on unit, the
GREEN
power light will illuminate.
It will take approximately 40 seconds from power up for the unit to become operational.
3. On the PC Internet Explorer Browser address line, enter the Paging Interface Adapter IP
address. The IP address can be found on the main board. (
192.168.1.239)
4.
The following screen will appear.
5.
When configuring the operation of the PIA with a Host System, select
Configuration Settings.
6.
Enter the default
User Name
and
Password
.[Use id:
comppage
, Password-
pia3264
]
7.
Click
OK
.
8.
The Global Setting screen will appear.
9.
If you are authorized to view and print reports, select
Reports.
10.
Enter the default
User Name
and
Password
.[Use id:
default
, Password-
pia3264
]
11.
Report selection is only active on the Master Unit.
Note: Do Not Check [Remember My Password]. Anyone with access to the computer
Has the ability to access the programming or reports on the PIA3264.
Summary of Contents for PIA3264
