Compleo A01AE11001.11, Operating Instructions Manual

Page: 71 / 114

2022-11 A01Axxxxxx.xx | 04 71
18 The charging system indicates the "Type 2 + Remove a plug" state.
• A plug of the corresponding charger interface can be
removed.
19 The charging system indicates the "Type 2 + Please connect
vehicle" state.
• The plug of the corresponding charger interface should be
connected to the vehicle.
20 The charging system indicates the "Type 2 – Out of service" state.
• The charger interface is not ready for operation. A charging
process cannot be started.
21 The charging system indicates the "Type 2 - Plug the plug in the
charging station" state.
• The plug of the corresponding charger interface must be
plugged into the charging station.
22 The charging system indicates the "Type 2 - Ready for ope
Please use card or key 3 to start" state.
• The charger interface is ready for operation. A charging
process can be started. Authorisation using a RFID card or
chips is required, alternatively key 3 can be used.
23 The charging system indicates the “1 = Scroll; * = OK ; # = Cancel"
state.
• The displayed menu can be operated using the icons
displayed. Scrolling is possible. Confirmation or cancellation
is possible.
24 The charging system indicates the "Type 2 + AN: + TAN: * =
# = Cancel" state.
• The charger interface is ready for operation. A charging
process can be started. A request number is required. A
transaction number is required. The entry can be deleted or
completely cancelled.
25 The charging system indicates the "Type 2 + TAN i Please
contact hotline" state.
• The charger interface is ready for operation. A charging
process cannot be started. An invalid transaction number
was entered. Information can be obtained via the hotline.
26 The charging system indicates the "Type 2 – Finish with entry + TAN:
+ * = # = Cancel" state.
• The charging process at the corresponding charger interface
is in progress. The charging process can be finished by
entering the transaction number.